E10100   Giant Tire / Earth Mover Bead Breaker Use on 5-piece rims 25" to 51" with pry bar/bead loosening pockets. 4 1/4" stroke, 13.8 ton ram will break the toughest beads. Same as IMT-1800 View the catalog page for E10100.
	E10101   "Combi" Bead Breaker Works on single, two and three-piece truck tires/rims, including some new style wheels. Breaks beads in seconds using 10,000 lbs. of force. The "Combi" Bead Breaker will not work on five-piece earth mover giant wheel/rim. Model ESCO10100 or ESCO10105 required. Similar to IMT-210 but has patented side straps which allow tool to be used on newer high flanged wheels. View the catalog page for E10101.
	E10312   55 Ton Aluminum Jack Lightweight yet durable. For use with 10,000 psi pumps (see recommended list below). Shipped completely assembled with valve, coupler and base. Perfect for off highway tire work. The perfect jack for road service. Weight is 29 lbs., collapsed height is 10.5" and extended height is 16.5" Weight capacity is 55 tons. Recommended pumps are ESCO10500 or ESCO10592. View the catalog page for E10312.
	E10500   Turbo II Air Hydraulic Pump 3.5 Quart Oil Capacity 3.5 quart oil capacity. Rugged polyglass reservoir with sight gauge. 10,000 psi hydraulic pressure. Easily works on rams and bead breakers with oil to spare. Compact design easily fits storage bins. Fastest pump available. Shipped with premium hydraulic oil. View the catalog page for E10500.
	E70150   Slide Hammer Breaks the most stubborn beads with ease. Reduces user fatigue with its spring action design. This design prevents slide hammer kick back. The wedge foot is forced between the bead and rim flange, delivering blow directly to the tip. Heavy duty tool that will not break. Compare with Ken-Tool T26B. View the catalog page for E70150.
	E70160   Manual Bead Breaker Loosens tire bead from rim with leverage. Excellent for working on the tire without removing the wheel from the tractor. Will handle 38" and 42" 14-ply farm tractor and backhoe tires with drop center rims to small ATV and lawnmower tires. Operates with an air ratchet wrench. DO NOT USE AN AIR IMPACT TOOL. View the catalog page for E70160.
	KEN33195   Nineteen-Five™ Tire Mounting and Demounting Set The set includes: 2 - KEN33199 Tire Mounting/Demounting Tools, 1 - KEN33196 Bead Holder for 19.5" Aluminum Wheels, KEN31710 Bead Holder for Steel Wheels - Solid Brass and KEN31810 Aluminum Wheel Protector - Leather. New tire bar uniquely designed to work on hub side of wheel - where hub protrudes above rim. Specially designed ends manipulate tire with less effort. Forged from high-grade carbon steel and heat-treated for long-lasting strength and durability. Watch the Video Demo at www.kentool.com. View the catalog page for KEN33195.
	KEN34950   Iron Man™ Ergonomic Wheel Lifting Bar Reduces back strain & injury when lifting truck tire & wheel assemblies. Lifts all sizes and types of small and large heavy duty truck wheels: Standard sizes including 22.5" and 24.5" wheels, plus European (which have 1" lug holes), Super Wide and even Super Single (a 340 lb. assembly) size. Specially designed forged ends work from either side of the wheel assembly as it lays flat. Watch the Video Demo at www.kentool.com. View the catalog page for KEN34950.
	KEN35440   Blue Cobra™ Truck Tire Demount Tool Quickly demounts nearly any 20", 22.5" and 24.5" tube-type and tubeless truck tires, up to a 13" wide wheel. Allows demounting of the tire without lifting the entire wheel and tire off the ground - reduces back injuries. Aluminum bead support to grab the top bead of Super Single and Super Wide tires. Ergonomic shaped steel handle with no-slip grip for optimum leverage. Watch the Video Demo at www.kentool.com. View the catalog page for KEN35440.
	KEN35936   Valve Breaker™ Tool Quickly removes the valve stem with the wheel on the floor. The Valve Breaker is compact and powerful; using a slide ram design to drive a heat-treated punch into the valve stem seat to easily pop the valve stem out of the rim after the wheel has been demounted. The Valve Breaker protects the operator with a rubber safety-grip drive handle and vibration absorbing rubber grip on the outer tube. 45" long and weighs 9 lb. View the catalog page for KEN35936.
	KEN31810   Aluminum Wheel Protector Prevents manual tire tools from marring and scratching aluminum or steel rims during the tire changing process. Durable leather protector fits on the rim and protects inside of the rim well. Can be used with an assortment of tire tools including: T45A style tire irons, Serpent, tire spoons, and other Ken-Tool tire changing tools. When one side wears out, flip it over and use the opposite end. Great for roadside service or in the shop. View the catalog page for KEN31810.
	SLP6550   Low Speed Air Buffer This low speed tire buffer is excellent for a variety of tire repair tasks requiring high torque and low speed. Equipped with safety throttle lever. Features 2,500 RPM rear exhaust performance. Comes with one quick change adapter. 2,500 Free Speed (RPM). Weight is 2.625 Lbs. View the catalog page for SLP6550.
	GHP-01R   Handle Protector Made of durable synthetic rubber. Fits multiple jack manufacturer's handles and popular tire tools. Unique design ensures a tight fit on jack/tool handles without slippage. An inexpensive way to protect against expensive repairs to vehicles View the catalog page for GHP-01R.
	982   Manual Adjustable Tire Spreader Features of the # 982 Manual Adjustable Tire Spreader: It has 4 tilt positions It will accommodate passenger and light truck tires - tire cross sections 145-275 It can easily be moved around the shop or bolted to the floor It is packed in one carton and weighs 68 pounds Easy to assemble View the catalog page for 982.
	976   Wheel Weight Tool The Tech # 976 Wheel Weight Tool installs and removes all types of clip-on wheel weights. The head of the tool has a plastic-type material for safe, mar-free installation of coated wheel weights used on alloy wheels. View the catalog page for 976.
	291UL & 292UL   Uni-Seal Ultra MAX Repairs A simple, less expensive, yet effective chemical nail hole and section repair system vs. a time consuming, expensive, traditional section repair on light truck, truck, agricultural and OTR tires. View the catalog page for the 291UL or the 292UL
	KTB32LB   Non-Fibrous Liquid Tire Balance Convenient premeasured 32-ounce bottle provides ease of application Instant tire balance for the life of the tire on 22.5" rims and above (not recommended for autos or light truck tires) Will not block valve stems Does not freeze Helps tires run cooler by reducing heat build-up Environmentally friendly - a lead-free method for balancing tires Recommended for over-the-road trucks Can be cleaned out of a tire in seconds with a wet vac Increases casing retreadability in new and retreaded tires Helps control liner oxidation and bead brittleness Can be used with the Cheetah or Blaster Bead Seaters Helps detect valve stem and tire damage View the catalog page for KTB32LB.
	RH315X   Rubberhog 4" Diameter Rasp Features a narrow cross-section, radius-face profile, with a very aggressive Rubberhog Extreme "MCM" #90 grit coating Cuts freely and leaves an excellent, scorch-free surface for bonding 4" diameter makes it easier to reach into deeper skives on the crown and sidewall of giant tires Fits a hex quick-change adapter with ½-20 thread The "MCM" grit coating is more open to reduce heat and smoke while improving service life The "MCM" grit coating is very aggressive and is great for rapid rubber removal and texturing on big jobs like OTR tires View the catalog page for RH315X.
	BOATR801HP   High Pressure Tubless Valve The Tech BAOTR801HP is ideal for light trucks and it has a wide rim groove for easy installation. For use to 100 psi / 6.9 bar cold infaltion pressure maximum. Recommended maximum rim thickness at rim hole is .205" / 5.2 mm. Rim hole .625" / 15.7 mm. View the catalog page for BOATR801HP.
	VH555D   Grommet Seal Valve For Alcoa Truck Wheels Longer sealing life Greater corrosion resistance Larger sealing surface Hex recess in base for easier installation Temperature range of grommet is -20F to 400F View the catalog page for VH555D.
	Grommet Seal Valves for Alcoa Truck Wheels View the catalog page for VH552 View the catalog page for VH553 View the catalog page for VH553C View the catalog page for VH553E View the catalog page for VH554D View the catalog page for VH555E
	Combo Tool and Mount/Demount Duckheads View the catalog page for Combo Mount/Demount Tool. View the catalog page for Nylon Mount/Demount Duckhead for TC14024784 Duckhead Kit. View the catalog page for Nylong Mount/Demount Duckhead With Round Hole for TC250309 Duckhead Kit.
	Lens Cover and Air Gauge For Coats Old Style Changers View the catalog page for Lens Cover - TMR107517 View the catalog page for Air Gauge Assembly - TMR107518
	239K   SEAL-IT Premium String Tubeless Tire Repair Kit The new SEAL-IT Kit comes complete with everything you need to repair a tire.*  The kit is housed in a durable ABS sealable container. (*This is a temporary repair only - see catalog page for more information) View the catalog page with expanded description and related links.
	TNT-100-1  --  Truck Tire Demount Tool Only one tool needed to demount tires. Eliminate the need to lift tire and rim to remove the bottom bead.  Save time... a tubeless tire can be demounted in as little as eight seconds.  Make tire demounting much easier. View our Catalog Page with expanded description and links to related items.
	TNT-200-M Super™  --  Truck Tire Mount Tool A tubless tire can be remounted in less than 20 seconds. View our Catalog Page with expanded description and links to related items.
	Ken-Tool Tire Iron (classic style) Ken-Tool brings back an old favorite.  Tip end inserts easily and will not cut or rip bead or sidewall. These designs make it easier to mount and demount tires without changing the way the tool is used. View our Catalog Page with expanded description and links to related items.
	Mini Air Compressor Mini air compressor with case. View our Catalog Page with expanded description.
	Digital Key Chain Gauge Large, easy to read LCD display.  Automatic on / off.  Range: 10-60 PSI or 0.5 - 4.2 BAR. View our Catalog Page.
	G12100 -- Gaither Truck Tire Demount Tool Demounts tire sizes 17.5" - 24.5" The angle of the back roller was designed to provide better leverage Eliminates the need to lift the tire and wheel, making a hard job easy Unique design protects valuable tire casing for retreading View the Catalog Page with expanded description and links to replacement parts.
	Tire Repair Tools 1136SM-T  T-Handled Probe       1136S Replacement Probe 1140SM-T  T-Handled Needle     1140S Replacement Needle 1143SM-T  T-Handled Rasp        1143S Replacement Rasp
	Chicago Pneumatic Low Speed Tire Buffer Kit Kit includes CP873 low speed tire buffer, whip hose, and exhaust hose.   Quick change slip chuck for fast and easy change of buffing wheels.  Adjustable speed regulator for precise control. View the Catalog Page with expanded description.
	Winntec Low Profile Garage Jack This ultra low garage jack has a minimum height of 85mm (3.35") and is equipped with a rubber saddle and handle bumper.  The pump piston is placed at a 45 degree angle so a complete pumping stroke will always be utilized. View the Catalog Pagewith expanded description.
	Tire Changer Accessories TC113125C - Three position extended X-clamp kit for Coats X-models TC184327 - 24" X-out clamp kit for clamping 23" and 24" alloy wheels. TC183604 - Quilted clamp sock for Jaws and Coats rim clamp tire changers (10 pack)
	Rotor and Brake Lathe Replacement Parts View the catalog page for Adjustable Ventilated Rotor Silencer Band. View the catalog page for Small Black Solid Rotor Silencer Band - 6-9" Diameter (2 pack). View the catalog page for Positive Rake Carbide Bit .20 Radius 15 Degree Angle (10 pack). View the catalog page for Negative Rake Carbide Bit .030 Radius (10 pack).
	Wheel Balancer Replacement Parts and Accessories View the catalog page for Wheel Caliper For Wheel Balancers. View the catalog page for 28mm Wheel Balancer Cone For All Coats Models (exluding 6401). View the catalog page for 40mm Wheel Balancer Cone.